Glass Fiber Reinforced Plastics Repair Fiberglass Putty

• Customization: Available
• CAS No.: 9003-01-4
• Formula: Yes
• Model NO.: Fiberglass Putty
• EINECS: 618-347-7
• Color: Green Fibrous Paste
• Appearance: Paste
• Main Raw Material: Polyester Resins
• Paint Film Property: Heat-Resisting Paint
• Method: Scratch
• Level: Primer
• Certification: ISO14001, ISO9001
• Substrate: Iron
• Components: Film Forming Matter
• Formation Mechanism: Conversion Type
• Shelf Life: 1 Years
• Transport Package: OEM Package Could Be Provided
• Specification: 1KG, 2KG, 4KG
• Trademark: MLB
• Origin: China
• HS Code: 3210000090
• Production Capacity: 500tons/Month

Product Description

1. Product composition
Unsaturated polyester resin, modified resin, pigment, filler, high-strength fiber, anti-settling material, auxiliary agent and special BPO hardener are prepared according to 100:2.
 

1. Product Features

Fiberglass polyester putty contains glass fiber filaments, which are used to bridge large defects, concave holes and fracture marks on the surface of steel plates, galvanized plates, aluminum plates, glass fiber reinforced plastics, etc. It has the characteristics of good construction, fast curing, high hardness, good impact resistance and strong adhesion, etc. It is a good bridging compound. After bridging, it forms a very hard and durable surface layer, and it has good water resistance after curing. This product has good sandability and plasticity.

3. Construction Scope
Suitable for a variety of metals (such as bare iron, stainless steel, aluminum, galvanized sheet, etc.), glass fiber reinforced plastic, old paint film, wood, and various two-component primer surfaces.

4.Main technical data sheet
Main putty indicator

Name	Project	Technical indicators	Test standards
Putty component	State Color appearance	No crusting, no lumps, no visible particles green  fibrous paste	Visual inspection  Visual inspection

Coating performance index

Project	Technical indicators	Test standards
Putty color and appearance dry condition Dry sanding time h(25ºC) ≤ Thickness cm Gel time (pot life)  min  ≥ Adhesion MPa≥ Flexibility mm  ≤ Impact strength cm  ≥	Pale yellow, even after scratching No obvious particles, no scratches, no cracks after drying 1 9~12 3 3 100 20	Visual inspection GB/T1728 GB/T1749 GB/T1728 GB/T5210 GB/T1748 GB/T1732

5.Construction reference:

1. Mix the putty and hardener at a ratio of 100:1-3 (to make the color consistent), and use it up within the gel time.

 

1. Scrape the adjusted polyester putty on the polished two-component primer or the treated sheet metal surface. If thick coating is required, it is best to scrape it thinly to the required thickness. If there are air bubbles infiltrated when smearing, it must be thoroughly scraped with a scraper to ensure good adhesion.

6.Notes:

1. Once the putty is mixed with hardener, it cannot be put into the tank again, and it should be covered immediately after use to avoid the deterioration of the putty caused by the volatilization of the solvent.

 

1. The consistency of the putty and the gel time can be adjusted according to customer requirements.

 

1. his product cannot be used for corrosive paints on metal surfaces, synthetic resins or nitrocellulose primers, and one-component acrylic primers, and it is not recommended to spray topcoat directly on the surface of this product.

 

1. The effective storage period is twelve months from the date of production. (After the shelf life is exceeded, it will be confirmed by standard inspection. If it is qualified, it can still be used.)

Q.1: Do you have color software formulas for mixing car paint?

A: Yes, we have. we can offer formulas including CD and on-line.

Q.2:Do you provide samples ? is it free or extra?
A:According to the actual situaton, we can provied free samples.

Q:3:Can you produce the paint with customer's brand?
A:We can do OEM for you with your brands.
 
Q:4:What kind of certificate do u have?
A:SGS, ISO9001:2008,ISO14001:2004,ISO/TS1694, MSDS, TDS etc.

Q:5:Can you offer free advertising materials to us?
A: Yes, we can offer color chart, posters, mixing ruler, T-shirts, catalogs, tin openers, etc.

Q:6:How long for your delivery time after pay deposit?
A:15-20 days depends on total quantity.

Q:7:Can you do customized colors?
A:Yes, we can, but we need the color sample from buyers. Or maybe you can send a picture for us for reference.