Automotive Paint Car Putty Filler Polyester Putty for Cars

• Customization: Available
• CAS No.: 9003-01-4
• Formula: Yes
• Model NO.: M30
• EINECS: 618-347-7
• Color: White
• Appearance: Liquid
• Main Raw Material: Acrylic
• Paint Film Property: Heat-Resisting Paint
• Method: Brush
• Level: Floating Coat
• Certification: ISO14001, ISO9001
• Substrate: Iron
• Components: Film Forming Matter
• Formation Mechanism: Conversion Type
• Shelf Life: 2 Years
• OEM: Yes
• Service: Free Samples
• Package: Carton
• Lead Time: 7-15 Working Days
• Certificate: ISO9001, ISO14001, MSDS
• Advantage: Easy Sanding Fast Dry
• Volumn: 1kg, 2kg, 4kg
• Transport Package: OEM Package Could Be Provided
• Specification: 1L, 2L, 4L, 5L
• Trademark: MLB
• Origin: China
• HS Code: 3210000090
• Production Capacity: 500tons/Month

Product Description

Product Description

BPO POYLESTER PUTTY

1. Product composition Unsaturated polyester resins, modified resins, pigments, fillers, anti-settling materials, special additives and special BPO curing agents are formulated at a ratio of 100:2. 2.Product Features The multi-functional series polyester putty has more fine body, less blisters, smooth and fine coating film, and finer coating structure. It can be used as the final fine scraping polyester putty. After fine grinding, no joints will be found on the edge part, and it has conventional Advantages of polyester putty: easy to apply and scratch, fast drying at room temperature, easy to polish, not to collapse, good filling, strong adhesion, high temperature resistance, good vertical construction, no sagging, good flexibility and matching, etc. This product is fast in construction , convenient, and greatly improve the construction efficiency. 3. Construction Scope Suitable for a variety of metals (such as bare iron, stainless steel, aluminum, galvanized sheet, etc.), glass fiber reinforced plastic, old paint film, wood, and various two-component primer surfaces.
 

Main technical data sheet

Main putty indicator

Name	Project	Technical indicators	Test standards
Putty component	State Color appearance	No crusting, no lumps, no visible particles Light yellow paste	Visual inspection  Visual inspection

Coating performance index

Project	Technical indicators	Test standards
Putty color and appearance	Pale yellow, even after scratching	Visual inspection
dry condition	No obvious particles, no scratches, no cracks after drying
Dry sanding time h(25ºC) ≤	1	GB/T1728
Thickness cm	9~12	GB/T1749
Gel time (pot life) min ≥	3	GB/T1728
Adhesion MPa ≥	5	GB/T5210
Flexibility mm ≤	50	GB/T1748
Impact strength cm ≥	18	GB/T1732

Construction reference: (1)Mix the putty and hardener at a ratio of 100:1-3 (to make the color consistent), and use it up within the gel time. (2)Scrape the adjusted polyester putty on the polished two-component primer or the treated sheet metal surface. If thick coating is required, it is best to scrape it thinly to the required thickness. If there are air bubbles infiltrated when smearing, it must be thoroughly scraped with a scraper to ensure good adhesion. 6.Notes: (1)Once the putty is mixed with hardener, it cannot be put into the tank again, and it should be covered immediately after use to avoid the deterioration of the putty caused by the volatilization of the solvent. (2)The consistency of the putty and the gel time can be adjusted according to customer requirements. (3)his product cannot be used for corrosive paints on metal surfaces, synthetic resins or primers, and one-component acrylic primers, and it is not recommended to spray topcoat directly on the surface of this product. (4)The effective storage period is twelve months from the date of production. (After the shelf life is exceeded, it will be confirmed by standard inspection. If it is qualified, it can still be used.)
 

Detailed Photos

 

 

AUTOMATIC MIXER

Finished paint formulation system for automotive

paint to improve the preparation efficiency of finished paint for you

Q.1: Do you have color software formulas for mixing car paint?
A: Yes, we have. we can offer formulas including CD and on-line.

Q.2:Do you provide samples ? is it free or extra?
A:According to the actual situaton, we can provied free samples.

Q:3:Can you produce the paint with customer's brand?
A:We can do OEM for you with your brands.
 
Q:4:What kind of certificate do u have?
A:SGS, ISO9001:2008,ISO14001:2004,ISO/TS1694, MSDS, TDS etc.

Q:5:Can you offer free advertising materials to us?
A: Yes, we can offer color chart, posters, mixing ruler, T-shirts, catalogs, tin openers, etc.

Q:6:How long for your delivery time after pay deposit?
A:15-20 days depends on total quantity.

Q:7:Can you do customized colors?
A:Yes, we can, but we need the color sample from buyers. Or maybe you can send a picture for us for reference.