Hot Selling Lightweight Putty Car Body Filler

• CAS No.: 9003-01-4
• Formula: Yes
• EINECS: 618-347-7
• Color: Light Yellow Paste
• Appearance: Paste
• Main Raw Material: Polyester Resins
• Model NO.: Lightweight Putty
• Paint Film Property: Heat-Resisting Paint
• Method: Scratch
• Level: Primer
• Certification: ISO14001, ISO9001
• Substrate: Iron
• Components: Film Forming Matter
• Formation Mechanism: Conversion Type
• Shelf Life: 1 Years
• Transport Package: OEM Package Could Be Provided
• Specification: 1KG, 2KG, 4KG
• Trademark: MLB
• Origin: China
• HS Code: 3210000090
• Production Capacity: 500tons/Month

Product Description

1. Product composition
All imported unsaturated polyester resins, original imported pigments, fillers and additives, active solvents, and ultra-light spherical powders are refined by a special production process, and equipped with a special BPO hardener to be used at a ratio of 100:2.
 

1. Product Features

The specific gravity of lightweight polyester putty is about 1.35g/cm3, the ash body is fine, it has good anti-stretching performance, excellent scratch resistance, and has good adhesion on aluminum alloy, cast iron, glass fiber reinforced plastic and wood products, and is easy to shape. After grinding, it has good compactness, strong flexibility, good high and low temperature crack resistance, vertical construction without sagging, good flexibility and matching, etc. This product is fast in construction, easy to polish, and has higher construction efficiency.

3. Construction Scope
Suitable for a variety of metals (such as bare iron, stainless steel, aluminum, galvanized sheet, etc.), glass fiber reinforced plastic, old paint film, wood, and various two-component primer surfaces.

4.Main technical data sheet
Main putty indicator

Name	Project	Technical indicators	Test standards
Putty component	State Color appearance	No crusting, no lumps, no visible particles Light yellow paste	Visual inspection Visual inspection

Coating performance index

Project	Technical indicators	Test standards
Putty color and appearance dry condition Dry time h(25ºC) ≤ Thickness cm Gel time (pot life)  min  ≥ Adhesion MPa≥ Flexibility mm  ≤ Impact strength cm  ≥	Pale yellow, even after scratching No obvious particles, no scratches, no cracks after drying 1 9~12 3 3 50 18	Visual inspection GB/T1728 GB/T1749 GB/T1728 GB/T5210 GB/T1748 GB/T1732

5.Construction reference:

1. Mix the putty and hardener at a ratio of 100:1-3 (to make the color consistent), and use it up within the gel time.

 

1. Scrape the adjusted polyester putty on the polished two-component primer or the treated sheet metal surface. If thick coating is required, it is best to scrape it thinly to the required thickness. If there are air bubbles infiltrated when smearing, it must be thoroughly scraped with a scraper to ensure good adhesion.

6.Notes:

1. Once the putty is mixed with hardener, it cannot be put into the tank again, and it should be covered immediately after use to avoid the deterioration of the putty caused by the volatilization of the solvent.

 

1. The consistency of the putty and the gel time can be adjusted according to customer requirements.

 

1. his product cannot be used for corrosive paints on metal surfaces, synthetic resins primers, and one-component acrylic primers, and it is not recommended to spray topcoat directly on the surface of this product.

 

1. The effective storage period is eighteen months from the date of production. (After the shelf life is exceeded, it will be confirmed by standard inspection. If it is qualified, it can still be used.)

Q.1: Do you have color software formulas for mixing car paint?

A: Yes, we have. we can offer formulas including CD and on-line.

Q.2:Do you provide samples ? is it free or extra?
A:According to the actual situaton, we can provied free samples.

Q:3:Can you produce the paint with customer's brand?
A:We can do OEM for you with your brands.
 
Q:4:What kind of certificate do u have?
A:SGS, ISO9001:2008,ISO14001:2004,ISO/TS1694, MSDS, TDS etc.

Q:5:Can you offer free advertising materials to us?
A: Yes, we can offer color chart, posters, mixing ruler, T-shirts, catalogs, tin openers, etc.

Q:6:How long for your delivery time after pay deposit?
A:15-20 days depends on total quantity.

Q:7:Can you do customized colors?
A:Yes, we can, but we need the color sample from buyers. Or maybe you can send a picture for us for reference.